Multiple Line Operation - D - NEC NEAX 2400 ICS Features Manual

Hide thumbs Also See for NEAX 2400 ICS:
Table of Contents

Advertisement

M-20D
M-20D
General Description
This feature allows for the appearance of multiple lines on the programmable line/feature keys of the D
set.
Operating Procedure
No manual operation is required.
Service Conditions
1.
Three kinds of lines can appear on D
MY Line (ML):
Prime Line (PL): This line is given priority for outgoing and incoming calls. The prime line is
Sub Line (SL):
2.
If a feature is activated that can trigger an AUTOMATIC RECALL [A-8], only the station being
recalled will ring, and the associated line lamp will rapid wink. Other D
that line as busy.
3.
All sublines of a D
4.
A virtual line (Software Line Appearance [S-33]), single line telephone or D
to the subline.
Interactions
1.
Sublines can belong to another station, or be a virtual/software line appearance. Sublines will
operate under the restrictions of the MY Line. Sublines must be located within the same Module
Group as the MY Line when assigning ASYD, System Data 1, Index 321, bit 0 as "0."
2.
Multi Line service in the Inter-Module Group under the control of one LP is available when
assigning ASYD, System DATA 321, bit 0 as "1."
Note:
On the IMGxh, Multi Line service is available within MG00-01 or MG02-03 (Inter-Module Group).
On the IMGdxh, Multi Line service is available within MG00-01, MG02-03, MG04-05, or MG06-07.
On the UMGx, Multi Line service is available within MG00-01, MG02-03, MG04-05, MG06-07, MG08-09,
MG10-11, MG12-13, MG14-15, MG16-17, MG18-19, MG20-21, MG22-23, MG24-25, MG26-27, MG28-29,
MG30-31.
Page 326

Multiple Line Operation - D

Multiple Line Operation - D
term
This line is associated with the extension number assigned to the port on
the interface circuit.
automatically seized when going off-hook.
This line designates any other line appearing on a D
serve as a prime line, unless differentiated in System Data programming).
term
must be located in the same Module Group as the D
term
s:
NEAX2400 ICS Business Features and Specifications
term
term
term
. (The MY Line will
term
stations will display
term
MY Line.
term
can be assigned
NDA-24143, Issue 4

Advertisement

Table of Contents
loading

Table of Contents