Call Forwarding - All Calls - Announcement - NEC NEAX 2400 ICS Features Manual

C-69
C-69

Call Forwarding - All Calls - Announcement

General Description
This feature permits all calls destined for a particular station to be routed to a recorded announcement.
Activation and cancellation may be accomplished by either the individual station user or the ATTENDANT
CONSOLE [A-3].
Operating Procedure
To activate CALL FORWARDING - ALL CALLS - ANNOUNCEMENT from an individual station:
1. Lift the handset; receive Dial Tone.
2. Dial the CALL FORWARDING - ALL CALLS - ANNOUNCEMENT access code (same as CALL
FORWARDING - ALL CALLS [C-5]); receive Special Dial Tone
3. Dial the desired announcement trunk access code (same as ANNOUNCEMENT SERVICE
[A-15]); receive Service Set Tone.
To cancel CALL FORWARDING - ALL CALLS - ANNOUNCEMENT from an individual station:
1. Lift the handset; receive Dial Tone.
2. Dial the CALL FORWARDING - ALL CALLS - ANNOUNCEMENT cancel code (same as CALL
FORWARDING - ALL CALLS [C-5]); receive Service Set Tone.
Service Conditions
1. This service feature requires one of the following hardware alternatives:
a.) Central Office Trunk (COT) or TIE Line Trunk (TLT) and an announcement machine.
b.) Digital Announcement Trunk (DAT).
2. Stations with this feature set may originate calls and access the CALL FORWARDING - ALL
CALLS - ANNOUNCEMENT cancellation code.
3. Stations activating CALL FORWARDING - ALL CALLS - ANNOUNCEMENT can be restricted
from placing any calls, except to the Attendant, depending upon System Data.
4. There is no limitation to the number of stations which can simultaneously set CALL
FORWARDING - ALL CALLS - ANNOUNCEMENT.
5. Stations may be assigned this feature via CLASS OF SERVICE - INDIVIDUAL [C-15]
programming in System Data.
6. For CALL FORWARDING - ALL CALLS - ANNOUNCEMENT, announcement trunk access
numbers may be programmed as the destination number.
7. When a call is directed to a forwarded station, one burst of ringing signal will be sent to the station
to indicate that it is call forwarded.
8. Call forwarding data remains programmed, even if the system is reinitialized or a power failure
occurs.
9. CALL FORWARDING - ALL CALLS - ANNOUNCEMENT can be provided for a maximum of 127
trunks, which include the announcement trunks for:
ANNOUNCEMENT SERVICE
ANNOUNCEMENT SERVICE - ATTENDANT
CALL FORWARDING - INTERCEPT /ANNOUNCEMENT [C-25]
Page 172
Call Forwarding - All Calls - Announcement
[A-15]
[A-59]
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4