Table of Contents
Advertisement
F-7
Service Conditions (cont'd)
6.
FORCED ACCOUNT CODE can be recorded on SMDR [S-10] for INWATS and central office
incoming calls, when used in conjunction with REMOTE ACCESS TO SYSTEM [R-2]. A
maximum of 10 digits can be registered as an account code for SMDR purposes.
7.
When used in conjunction with REMOTE ACCESS TO SYSTEM [R-2], FORCED ACCOUNT
CODE cannot be registered on SMDR if the incoming calls are terminated to stations via night
service or DID [D-8].
8.
FORCED ACCOUNT CODE can be output in the SMDR [S-10] record for outgoing calls from a
station handled with OUTGOING TRUNK QUEUING [O-2].
Note:
There are two methods of FORCED ACCOUNT CODE assignment. These methods are Full
Implementation and the Check Sum method. In the Full Implementation method, the whole FORCED
ACCOUNT CODE is assigned in the AATC command and System Data 1, Indexes 12, 13, & 14 are
assigned 00H. In the Check Sum method, partial assignment for each FORCED ACCOUNT CODE is
assigned in the AATC command. The last one or two digits (programmable option) are determined
according to the data assignments in ASYD, System Data 1, Indexes 12, 13, & 14.
Interactions
1.
If FORCED ACCOUNT CODES are used on a per-tenant basis, AUTHORIZATION CODES [A-
20] and ACCOUNT CODES [A-18] are not.
2.
Station and Remote Access users share the same FORCED ACCOUNT CODES, assigned in
AATC.
3.
There are no restrictions regarding the first digit of FORCED ACCOUNT CODES except what is
programmed in AMND. Tenant 0 does not conflict with the PBX numbering plan. This is true
when separate tenant tables are provided. If common tenant tables are used, a conflict between
LCRS and OGC (A) used with SMDR will occur.
Note:
The Access Code to the FORCED ACCOUNT CODES feature must be assigned within the PBX numbering
plan.
term
4.
When a D
ACCOUNT CODE will be recorded if previously dialed.
5.
A FORCED ACCOUNT CODE can be entered when a MODEM POOLING [M-21] call is
established by D
6.
The AMND command determines the length of FORCED ACCOUNT CODES based on the first
digit of the code. For example, FORCED ACCOUNT CODES beginning with the digit 4 can be
assigned as six digits long, and codes beginning with 5 can be assigned as three digits long.
7.
PEG COUNTS [P-7] of invalid FORCED ACCOUNT CODES are not available.
8.
FORCED ACCOUNT CODES can be dialed by a station user when establishing a
CONSULTATION HOLD [C-17] connection.
9.
Access to the FORCED ACCOUNT CODE feature is determined by the station's CLASS OF
SERVICE-INDIVIDUAL [C-15].
10. FORCED ACCOUNT CODES cannot be programmed for use via SPEED CALLING-SYSTEM,
GROUP, INDIVIDUAL [S-7, 8, 9] features. As a feature to make outgoing calls, SPEED
CALLING [S-7, 8, 9] does not first provide translation for feature access. However, FORCED
ACCOUNT CODES can be programmed as part of the D
[S-26D] feature.
Page 254
Forced Account Code
user initiates the LAST NUMBER CALL-D
term
, but not when accessed via a Data Module.
term
[L-6D] feature, the FORCED
term
SPEED CALLING-ONE TOUCH
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
