Table of Contents
Advertisement
A-8D
A-8D
General Description
This feature works as a timed reminder. When a D
[E-4D] or NON-EXCLUSIVE HOLD [N-7D]) or during an unattended transfer for a variable, programmable
term
period of time, the D
Operating Procedure
No manual operation is required.
Service Conditions
1.
AUTOMATIC RECALL - D
TIMING PARAMETERS
term
2.
If the D
reenters a held or transferred call, timing is reset when the call is returned to a
RECALL position.
3.
When a held call returns to the D
and an LED flashing at 240 IPM occurs until the call is retrieved. The upper LCD goes blank
during recall. The signal occurs whether the D
4.
When an unattended transfer returns to the originator of the transfer, the D
for 30 seconds (VARIABLE TIMING PARAMETERS [V-1]), if the release signal is not provided
from the distant end. The LCD displays:
term
D
Series E
term
5.
When a D
[T-2D], the AUTOMATIC RECALL - D
Page 18
Automatic Recall - D
Automatic Recall - D
is automatically alerted.
term
timing is default in System Data at 30 seconds. See VARIABLE
[V-1]
for other selectable timing choices.
term
Transferred
RCL
(Time Display)
RECALL
(Time Display)
holds a call by NON-EXCLUSIVE HOLD [N-7D] during a THREE-WAY CALL
term
term
handled call remains on hold (EXCLUSIVE HOLD
, a continuous ring of 0.5 seconds ON, 0.5 seconds OFF,
term
is on-hook or off-hook.
Transferring
Station
Station/Trunk
XXXX
XXXX
XXXX
XXXX
term
feature cannot be activated.
NEAX2400 ICS Business Features and Specifications
term
term
will ring normally
NDA-24143, Issue 4
Advertisement
Table of Contents
