Attendant Lockout - NEC NEAX 2400 ICS Features Manual

A-5
A-5
General Description
This feature denies an Attendant the ability to re-enter an established trunk/station connection without
being recalled by the station.
Operating Procedure
No manual operation is required once this feature has been programmed into system data.
Service Conditions
1. This feature is, by definition, mutually exclusive with:
ATTENDANT OVERRIDE
BUSY VERIFICATION
2. Lockout is inoperative on TRUNK-TO-TRUNK CONNECTION [T-10] when the release signal is
not provided from the distant end.
3. Lockout is not used unless the feature is provided which gives 2-party hold capability. Without
this capability, the completed call is removed from the ATTENDANT CONSOLE [A-3] loop, so
the Attendant cannot reenter for assistance or any other purpose.
Interactions
1. ATTENDANT OVERRIDE [A-7]: In those cases where answer supervision is returned on
TRUNK-TO-TRUNK CONNECTIONS [T-10], the Attendant can override the busy condition by
using the ATTENDANT OVERRIDE [A-7] feature.
2. TRUNK-TO-TRUNK CONNECTION [T-10]: Privacy is automatically disabled for TRUNK-TO-
TRUNK calls, if the release signal is not provided from the distant end.
3. SPLITTING [S-4]: The Privacy feature works with the SPLITTING [S-4] feature to cause
automatic splitting.
4. Switched Loop Operation: Call processing is modified so that pressing a loop key does not cause
the Attendant to be bridged on an established call unless the Attendant is recalled. An exception
is a TRUNK-TO-TRUNK CONNECTION [T-10] when the release signal is not provided from the
distant end.
5. ATTENDANT-CONTROLLED CONFERENCE [A-2]: When the Attendant reenters a conference
connection to answer a recall, only the Attendant and the recalling station are connected
together.
Page 10

Attendant Lockout

Attendant Lockout
[A-7]
[B-3]
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4