Front Suspension; General Description; Front Suspension Construction - Suzuki SX4 Service Manual

2B-1 Front Suspension:

Front Suspension

Suspension

Front Suspension Construction

CAUTION
!
There are two types of front suspension mounting bolt. One is pre-coated with friction stabilizer. The
other is not. Never reuse pre-coated bolt to prevent it from loosening. Be sure to replace pre-coated
bolt with a new one whenever loosening once.
(b)
(g)
[A]
(b)
[A]: Non-pre-coated bolt
[B]: Pre-coated bolt with friction stabilizer
1. Front strut assembly
2. Front drive shaft
3. Steering knuckle
4. Front wheel hub
5. Stabilizer joint
6. Stabilizer bar

General Description

(b)
)
[A] [B]
(b)
6
8
[B]
(h)
7. Tie-rod
8. Front suspension frame
9. Suspension control arm
: 140 N⋅m (14.0 kgf-m, 101.5 lb-ft)
: 150 N⋅m (15.0 kgf-m, 108.5 lb-ft)
: 50 N⋅m (5.0 kgf-m, 36.5 lb-ft)
: 45 N⋅m (4.5 kgf-m, 32.5 lb-ft)
: 60 N⋅m (6.0 kgf-m, 43.5 lb-ft)
2
(h)
(b)
5
7
9
(a)
(d)
)
(h)
(e)
(d)
S7RW0A2201001
(c)
(i)
F
(c)
1
(h)
3
4
(f)
I8RW01220011-03
: 200 N⋅m (20.0 kgf-m, 145.0 lb-ft)
: 23 N⋅m (2.3 kgf-m, 17.0 lb-ft)
: 95 N⋅m (9.5 kgf-m, 69.0 lb-ft)
: 55 N⋅m (5.5 kgf-m, 40.0 lb-ft)
: Do not reuse.
F: Forward