Front Brake Disc Inspection - Suzuki SX4 Service Manual

4B-7 Front Brakes:
3) Pull brake disc off by using 8 mm bolts (1) (2 pcs).
Installation
1) Install caliper assembly to steering knuckle.
CAUTION
!
Make sure that flexible hose is not twisted
when installing caliper assembly. If it is
twisted, reinstall it using care not to twist it.
2) Tighten caliper carrier bolts to specified torque.
Tightening torque
Caliper carrier bolt (a): 85 N·m (8.5 kgf-m, 61.5
lb-ft)
3) Install front wheel referring to "Wheel (with Tire)
Removal and Installation in Section 2D".
4) Perform brake test.

Front Brake Disc Inspection

• Using magnetic stand and with dial gauge positioned
at about 10 mm (0.39 in.) inward from periphery of
disc, measure deflection of disc.
If it exceeds the limit, correct or replace the brake
disc.
Front brake disc deflection
Limit: 0.10 mm (0.004 in.) max.
Special tool
(A): 09900–20607
(B): 09900-20701
I5RW0A420003-01
• Using micrometer, measure thickness of brake disc.
If it is less than limit, replace brake disc.
Front brake disc thickness "a"
Standard: 22.0 mm (0.87 in.)
Limit: 20.0 mm (0.79 in.)
I4RS0B420012-01
S7RW0A4206009
I4RS0B420013-01
I4RS0B420014-01