Toro 04384 Service Manual page 31

8. Connect all electrical harness connectors to engine
using labels placed during engine removal.
9. Connect throttle cable to the swivel on injector pump
speed control lever (Fig. 14). Adjust cable (see Adjust
Throttle Control in the Adjustments section of this chap-
ter).
10.Install exhaust system to machine (see Exhaust Sys-
tem in this section).
11. Install radiator to machine (see Radiator in this sec-
tion).
12.Install air cleaner to machine (see Air Cleaner in this
section). Make sure that all hose clamps are properly
tightened.
Greensmaster 3250--D
13.Remove plugs placed during engine removal from
fuel hoses. Connect fuel supply hose to the injector
pump fitting and fuel return hose to the #3 injector fitting.
Secure fuel hoses with hose clamps.
14.Open fuel shut--off valve on fuel tank. Check tank
and hoses for leaks.
15.Fill cooling system with coolant. Check radiator and
hoses for leaks.
16.Make sure that engine oil level is correct.
17.Make sure that alternator belt tension is properly ad-
justed.
18.Bleed fuel system.
Page 3 - - 17 Diesel Engine