Oil Cooler (If Equipped) - Toro 04384 Service Manual

Oil Cooler (If Equipped)

11
9
10
13
7
OIL FLOW
1. Oil cooler
2. Lower formed hose
3. Upper formed hose
4. Grommet (2 used)
5. Hose clamp (4 used)
6. Hydraulic tube
Removal (Fig. 57)
1. Park the machine on a level surface, engage the
parking brake, lower the cutting units and stop the en-
gine. Remove key from the ignition switch.
CAUTION
Before continuing further, read and become fa-
miliar with General Precautions for Removing
and Installing Hydraulic System Components.
Hydraulic System
11
8
10
6
5
4
4
Figure 57
7. Hydraulic tube
8. Hydraulic straight fitting
o
9. 90 hydraulic fitting
10. O- -ring
11. O- -ring
Page 4 - - 82
14
12
5
3
2
15
12. Radiator support
13. Hydraulic filter
14. Hydraulic tank
15. Radiator screen
16. Latch (2 used)
CAUTION
The radiator and oil cooler may be hot. To avoid
possible burns, allow the engine and cooling
systems to cool before working on the oil cooler.
2. Remove radiator screen from radiator support.
3. Clamp upper and lower formed hoses (items 3 and
2) to prevent draining of the hydraulic system and tank.
1
5
16
Greensmaster 3250--D