Upc-A; Telepen Message Length - Honeywell Stratos 2700 User Manual

Telepen Message Length

Scan the bar codes below to change the message length. Refer to
information. Minimum and Maximum lengths = 1-80. Minimum Default = 3, Maximum Default = 80.
Minimum Message Length

UPC-A

UPC-A On/Off
* On
Note: To convert UPC-A bar codes to EAN-13, see
UPC-A Check Digit
This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not.
Default = On.
* On
Message Length Description
Default All UPC-A Settings
Convert UPC-A to EAN-13
(page 9-1) for additional
Maximum Message Length
Off
on page 9-41
9 - 29