Honeywell Stratos 2700 User Manual page 170

inside the back cover of this manual. Then scan the Save bar code. Default = 1.
UPC-E0 Redundancy
UPC/EAN Addenda Redundancy
This programs the number of redundant scans required of a 2 or 5-digit addendum before it is attached to the UPC or EAN
bar code and submitted. To adjust the redundancy, scan the Redundancy bar code below for the 2 or 5-digit addenda you
want to adjust, then scan a redundancy count between 0 and 10 on the Programming Chart inside the back cover of this
manual. Then scan the Save bar code. Default = 2 for 2-Digit Addenda, 1 for 5-Digit Addenda.
2-Digit Addenda
Redundancy
5-Digit Addenda
Redundancy
9 - 40