Chapter 12 - Utilities; To Add A Test Code I.d. Prefix To All Symbologies; Show Software Revision; Show Data Format - Honeywell Stratos 2700 User Manual

12
Utilities

To Add a Test Code I.D. Prefix to All Symbologies

This selection allows you to turn on transmission of a Code I.D. before the decoded symbology. (See the Symbology Charts,
beginning on page A-1) for the single character code that identifies each symbology.) This action first clears all current prefixes,
then programs a Code I.D. prefix for all symbologies. This is a temporary setting that will be removed when the unit is power
cycled.
Add Code I.D. Prefix to
All Symbologies (Temporary)

Show Software Revision

Scan the bar code below to output the current software revision, unit serial number, and other product information for the scan-
ner.
Show Revision

Show Data Format

Scan the bar code below to show current data format settings.
Data Format Settings

Test Menu

When you scan the Test Menu On code, then scan a programming code in this manual, the scanner displays the content of a
programming code. The programming function will still occur, but in addition, the content of that programming code is output to
the terminal.
Note: This feature should not be used during normal scanner operation.
On
* Off
12 - 1