No Read - Honeywell Stratos 2700 User Manual

When the output sequence is Off, the bar code data is output to the host as the scanner decodes it. Default = Off.
Required
On/Not Required
*Off

No Read

With No Read turned On, the scanner notifies you if a code cannot be read. If using an EZConfig-Scanning Tool Scan Data
Window (see page 12-2), an "NR" appears when a code cannot be read. If No Read is turned Off, the "NR" will not appear.
Default = Off.
On
* Off
If you want a different notation than "NR," for example, "Error," or "Bad Code," you can edit the output message (see Data
Formatting beginning on page 8-1). The hex code for the No Read symbol is 9C.
4 - 20