Power Up Beeper; Button Controls; Button Click; F1 Programmable Button - Honeywell Stratos 2700 User Manual

Power Up Beeper

The scanner can be programmed to beep when it's powered up. Scan the Off bar code(s) if you don't want a power up
beep. Default = Power Up Beeper On.
Power Up Beeper Off

Button Controls

To program the buttons for additional functionality, see the descriptions that follow.

Button Click

To hear an audible click when any button is pressed, scan the Button Click On bar code below. Scan the Button Click Off
code if you don't wish to hear the click. Default = Button Click Off.
* Button Click Off

F1 Programmable Button

The F1 button can be programmed for several different functions. By default, press this button once quickly to repeat the
last scan, or press and hold for 5 seconds to deactivate an EAS tag. Use the selections that follow to change these default
settings.
4 - 4
Scale Zero
Image Capture
Sound
F1 Programmable
Functions
* Power Up Beeper On
Button Click On