Same Symbol Test; Bar Code Absence Detection - Honeywell Stratos 2700 User Manual

Long (3000ms)
Extra Long (4000ms)

Same Symbol Test

When Same Symbol Test On is scanned, the current bar code must be 1 character different from the previous bar code in
order to be read. When Same Symbol Test Off is scanned, the bar codes must be 25% different to be read. Default =
Same Symbol Test Off.
* Same Symbol Test Off
Same Symbol Test On

Bar Code Absence Detection

Use this selection to set a timeout (in milliseconds) before the scanner can read a bar code after any other code is read.
The timer starts after the first bar code has left the field of view. Scan Bar Code Absence Detection, set the timeout dura-
tion (from 0-300,000 milliseconds) by scanning digits on the Programming Chart inside the back cover of this manual, then
scanning Save. Default = 0 (No Delay).
Bar Code Absence Detection
4 - 14