the
Programming Chart
Beep on BEL Character
You may wish to force the scanner to beep upon a command sent from the host. If you scan the Beep on BEL On bar code
below, the scanner will beep every time a BEL character is received from the host. Default = Beep on BEL Off.
*Beep on BEL Off
Good Read Indicators
Beeper – Good Read
The beeper may be programmed On or Off in response to a good read. Turning this option off, only turns off the beeper
response to a good read indication. All error and menu beeps are still audible. Default = Beeper - Good Read On.
Note: Also see
Good Read Beep - Aux Scanner
Beeper - Good Read Off
4 - 8
inside the back cover, then scanning Save. Default = 50.
JPEG Image Quality
(page 5-2) to set which device emits the good read beep.
Beep on BEL On
* Beeper - Good Read On