Place The Platter; Adjust The Height - Honeywell Stratos 2700 User Manual

Place the Platter

Place the platter in position over the horizontal window.
WARNING: Do not attempt to adjust the screws that support the platter. Any attempt to do so may throw
the scale out of calibration.

Adjust the Height

Make sure the platter is at the correct height and completely level. The front edge of the platter should be flush with the
check stand. To adjust the height, turn the leveling screws. If the model 2753 is installed, adjust the 4 leveling screws in the
check stand until the platter is at the correct height.
2 - 11