Default Settings And Technical Specifications; Default Factory Settings - NETGEAR DGFV338 ProSafe Reference Manual

Default Settings and Technical Specifications

Default Factory Settings

You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
• To perform a hard reset, push and hold the reset button for approximately 10 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in Table A-1 below.
• Pressing the Reset button for a shorter period of time will simply cause your device to reboot.
Table A-1. Default Configuration Settings
Feature
Router Login
User Login URL
User Name (case sensitive)
Login Password (case sensitive)
ADSL Modem Settings
Multiplexing Method
Virtual Path Identifier (VPI)
Virtual Channel Identifier (VCI)
Internet Connection
WAN MAC Address (Ethernet)
WAN MAC Address (ADSL)
WAN MTU Size
Port Speed
Local Network (LAN)
Default Behavior
http://192.168.1.1
admin
password
LLC-based
0
35
Use Default address
Use Default Address
1500
AutoSense
v1.0, May 2008
Appendix A
A-1