Factory Settings, Technical Specifications, And Wall Mounting; Factory Settings - NETGEAR Wireless-N 150 User Manual

Factory Settings, Technical Specifications, and
This appendix includes the factory settings and technical specifications for the Wireless-N 150
ADSL2+ Modem Router, and instructions for wall-mounting the unit.

Factory Settings

You can return the wireless modem router to its factory settings. On the bottom of the wireless
modem router, press and hold the Restore Factory Settings button
wireless modem router resets, and returns to its factory settings. Your device will return to the
factory configuration settings shown in the following table.
Feature
Router User login URL
login
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local LAN IP
network
Subnet mask
(LAN)
RIP direction
RIP version
RIP authentication
DHCP server
DHCP starting IP address
DHCP ending IP address
DMZ

Factory Settings, Technical Specifications, and Wall Mounting

Default Behavior
http://www.routerlogin.com
admin
password
Use default address
1492
Autosensing
192.168.0.1
255.255.255.0
None
Disabled
None
Enabled
192.168.0.2
192.168.0.254
Disabled
v1.1, January 2010
Appendix A
Wall Mounting
for over 7 seconds. The
A-1