DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
3. Click Apply. The new rule will be listed in the Inbound Services table.
Figure 4-6
To make changes to an existing inbound service rule:
1. In the Action column adjacent to the rule, click the button for the desired actions:
•
Edit – to make any changes to the rule definition. The Inbound Service screen will be
displayed (see
selected rule.
•
Up or Down – to move the selected rule to a new position in the table. .
Note: Since rules are applied in the order listed (from top to bottom), the order of
•
Delete – to delete the selected rule.
2. Check the box adjacent to the rule, then do any of the following:
•
Click Enable to enable the rule. The "!" Status icon will turn green.
•
Click Disable to disable the policy. A rule can be disabled if not in use and enabled as
needed. Disabling a rule does not delete the configuration, but merely de-activates the
rule. The status circle will change from green to grey, indicating that the rule is disabled.
(By default, when a rule is added to the table it is automatically enabled.)
•
Click Delete to delete the rule.
4-10
"Inbound Rules (Port Forwarding)" on page
the rules may make a difference in how traffic is handled.
v1.0, May 2008
4-7) with the data for the
Security and Firewall Protection