NETGEAR DGN2200M User Manual
  1. Manuals
  2. Brands
  3. NETGEAR Manuals
  4. Network Router
  5. DGN2200M - Wireless-N 300 Router
  6. User manual
NETGEAR DGN2200M User Manual

NETGEAR DGN2200M User Manual

N300 wireless adsl2+ modem router
Hide thumbs Also See for DGN2200M:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Installation Manual
350 East Plumeria Drive
San Jose, CA 95134
USA
August 2011
202-10801-01
v1.0
N300 Wireless ADSL2+

Modem Router

DGN2200Mv2

User Manual

Advertisement

Table of Contents
loading

Related Manuals for NETGEAR DGN2200M

Summary of Contents for NETGEAR DGN2200M

  • Page 1: Modem Router

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 User Manual 350 East Plumeria Drive San Jose, CA 95134 August 2011 202-10801-01 v1.0...

  • Page 2: Technical Support

    To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use, or application of, the product(s) or circuit layout(s) described herein.

  • Page 3: Table Of Contents

    Table of Contents Chapter 1 Internet Configuration Log In............7 Setup Wizard .
  • Page 4 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Chapter 4 Manage Your Network Back Up, Restore, and Erase Your Settings ..... . . 44 Router Status and Usage Statistics .
  • Page 5 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Problems with Date and Time ........83 Appendix A Technical Specifications Technical Specifications .

  • Page 6: Chapter 1 Internet Configuration

    Installation Guide included in the package, or use the Animated Install Guide on the CD. For installation instructions in a language other than English, see the language options on the CD. For more information about the topics covered in this manual, visit the support website at http://support.netgear.com.

  • Page 7: Log In

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Log In You can log in to the wireless modem router to view or change its settings, and to access the Knowledge Base and documentation. When you have logged in, if you do not click Logout, the wireless modem router waits for 5 minutes after no activity before it automatically logs you out.

  • Page 8: Setup Wizard

    3G Mobile Broadband Settings on page 12. Note: NETGEAR recommends that you use the installation CD-ROM to install and configure your NETGEAR wireless modem router, rather than using the firmware application to perform the installation. This will simplify the installation process, and ensure that your router is configured correctly.
  • Page 9 IP address of the primary DNS server for your ISP. If a secondary DNS server address is available, enter that also. DNS servers translate an Internet name such as www.netgear.com to a numeric IP address. •...

  • Page 10: Fixed Ip (Static) Account Setup

    This information should have been provided to you by your ISP. Enter the IP address of your ISP’s primary DNS server. If a secondary DNS server address is available, enter it also. DNS servers translate an Internet name such as www.netgear.com to a numeric IP address. Manual Setup In order to connect to the network, an active broadband service account is required.
  • Page 11 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 This opens the Broadband Settings configuration screen, which allows you to configure your broadband settings, as shown in Figure 3, Broadband Settings Configuration Screen. Figure 3. Broadband Settings Configuration Screen Enter your settings. Table 1 on page 12 describes the Broadband Settings fields and options.

  • Page 12: 3G Mobile Broadband Settings

    To configure your 3G mobile broadband Internet settings manually: Select 3G Mobile Broadband Settings. This opens the 3G Mobile Broadband Settings configuration screen. This screen allows you to configure the broadband account access for your NETGEAR Modem. Figure 4. 3G Mobile Broadband Settings Configuration Screen Internet Configuration...

  • Page 13: Basic Isp Settings

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Enter your settings. In order to connect to the network, an active broadband service account is Required. Contact your ISP for username, password. and the network name • Username. Account login username. • Password. Account password for authentication. •...
  • Page 14 If no login is required, you can specify the MAC Address setting. Click Apply to save your settings. Click Test to test your Internet connection. If the NETGEAR website does not appear within 1 minute, see Troubleshooting the Internet Connection on page 78.
  • Page 15 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 The following table describes the Basic Settings screen fields and options. Settings Description Does Your ISP Require a Login? • Yes • No These fields Account Name Enter the account name provided by your ISP. This might also be called the appear only if no (If required) host name.

  • Page 16: Adsl Settings

    ADSL Settings For information about how to install ADSL filters, see the Setup Manual. NETGEAR recommends that you use the Setup Wizard to automatically detect and configure your ADSL settings. This usually works fine. However, if you have technical experience and are sure of the multiplexing method and virtual circuit number for the virtual path identifier (VPI) and virtual channel identifier (VCI), you can specify those settings here.
  • Page 17 N300 Wireless ADSL2+ Modem Router DGN2200Mv2  To specify ADSL settings manually: Select ADSL Settings to display the following screen: If your ISP provided you with a multiplexing method or VPI/VCI number, then enter the setting. Otherwise, the default settings are adequate. In the Multiplexing Method drop-down list, select LLC-based or VC-based.

  • Page 18: Chapter 2 Wireless Network Configuration

    For a wireless connection, the SSID, also called the wireless network name, and the wireless security settings must be the same for the wireless modem router and wireless computers or wireless adapters. NETGEAR strongly recommends that you use wireless security. Note: Computers can connect wirelessly at a range of hundreds of meters.

  • Page 19: Preset Wireless Security

    20. The Wireless Settings screen lets you view and change the preset security settings. However, NETGEAR recommends that you not change your preset security settings. you do decide to change your preset security settings, make a note of the new settings and store it in a safe place where you can easily find it.

  • Page 20: Wireless Placement And Range Guidelines

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 • Push 'N' Connect (WPS) implements WPA/WPA2 wireless security on the wireless modem router and your wireless computer or device at the same time. The wireless computer or device must be compatible with WPS. Push 'N' Connect (WPS) Method on page 28.
  • Page 21 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 • Turn off the broadcast of the wireless network name (SSID). If you disable broadcast of the SSID, only devices that have the correct SSID can connect. This nullifies wireless network discovery feature of some products, such as Windows XP, but the data is still exposed.

  • Page 22: Manually Configure Wireless Settings

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Manually Configure Wireless Settings Note: If you use a wireless computer to change the wireless network name (SSID) or wireless security, you will be disconnected when you click Apply. To avoid this problem, connect your computer to the router with an Ethernet cable while you are making changes.
  • Page 23 Channel expansion operates on a frame-by-frame basis to avoid wireless LAN interference with transmissions from other wireless networks. Two (NETGEAR). channels are used, but only the first is listed in the Channel field. The associated channels are: 1+5, 2+6, 3+7, 4+8, 5+9, 6+10, and 7+11.

  • Page 24: Restrict Access By Mac Address

    Address. Security Options None You can use this setting to establish wireless connectivity before implementing wireless security. NETGEAR strongly recommends that you implement wireless security. Use encryption keys and data encryption for data security. You can select 64-bit or 128-bit encryption. See WEP. WEP is available only when the Mode setting is Up to 54 Mbps.
  • Page 25 N300 Wireless ADSL2+ Modem Router DGN2200Mv2  To restrict access based on MAC addresses: Select Setup > Wireless Settings and click the Set Up Access List button to display the list. Select the Turn Access Control On check box to enable the restricting of wireless computers by their MAC addresses.

  • Page 26: Wpa, Wpa2, Or Wpa + Wpa2

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 WPA, WPA2, or WPA + WPA2 Note: WPA-PSK, WPA2-PSK (AES), or WPA-PSK (TKIP) + WPA2-PSK (AES) security is required for the Up to 145 Mbps or Up to 300 Mbps Mode setting. Both WPA and WPA2 provide strong data security. WPA with TKIP is a software implementation that can be used on Windows systems with Service Pack 2 or later, WPA2 with AES is a hardware implementation;...
  • Page 27 N300 Wireless ADSL2+ Modem Router DGN2200Mv2  To configure WEP data encryption: Select Wireless Settings to display the following screen. Make sure the Mode setting is set to Up to 54 Mbps. In the Security Options section, select the WEP radio button: Select the Authentication Type: Automatic or Shared Key.

  • Page 28: Push 'N' Connect (Wps) Method

    Some considerations regarding WPS are: • NETGEAR’s Push 'N' Connect feature is based on the WPS standard. All other Wi-Fi-certified and WPS-capable products should be compatible with NETGEAR products that implement Push 'N' Connect.
  • Page 29 N300 Wireless ADSL2+ Modem Router DGN2200Mv2  To use the wireless modem router WPS button to add a WPS client: Select Add a WPS Client and click Next. By default, the Push Button (recommended) radio button is selected. button Either click the onscreen button or press the WPS button on the front of the wireless modem router.

  • Page 30: Wps Pin Entry

    The client must support a WPS PIN, and must have a WPS configuration utility, such as the NETGEAR Smart Wizard or Atheros Jumpstart. The first time you add a WPS client, make sure that the Keep Existing Wireless Settings check box on the WPS Settings screen is cleared.
  • Page 31 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 wireless settings so that they are easier for you to remember. If you do that, then you will need to set up the WPS-compatible computers again.  To change the network wireless settings: Note: Making these changes causes all wireless computers to be disconnected from network.
  • Page 32 Protect Your Network This chapter describes how to use the basic firewall features of the wireless modem router to protect your network. The chapter includes: • Password and Login Timeout Settings • Block Keywords, Sites, and Services on page 34 •...

  • Page 33: Password And Login Timeout Settings

    Internet connection. NETGEAR recommends that you change this password to a more secure password. The ideal password should contain no dictionary words from any language, and should be a mixture of both upper case and lower case letters, numbers, and symbols.

  • Page 34: Change The Administrator Login Time-Out

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Change the Administrator Login Time-Out For security, the administrator’s login to the wireless modem router configuration times out after a period of inactivity.  To change the login time-out period: In the Set Password screen, type a number in the Administrator login times out field. The suggested default value is 5 minutes.

  • Page 35: Block Services

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 To enable keyword blocking, select one of the following: • Per Schedule. Turn on keyword blocking according to the settings in the Schedule screen. • Always. Turn on keyword blocking all the time, independent of the Schedule screen. •...

  • Page 36: Firewall Rules

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Click Apply to save your settings. Firewall Rules Use this screen to create firewall rules to block or allow specific traffic. Note: This feature is for Advanced Administrators only. Incorrect configuration will cause serious problems. ...

  • Page 37: Time Zones And Services Scheduling

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 The table under inbound services lists all existing rules for inbound traffic. If you have not defined any rules, only the default rule will be listed. The default rule blocks all inbound traffic. a. From the Firewall Rules screen under Inbound Services, click Add: b.

  • Page 38: Set Your Time Zone

    The wireless modem router has a list of NETGEAR NTP servers. If you would prefer to use a particular NTP server as the primary server, select the Use this NTP Server check box, and enter its IP address.

  • Page 39: View, Select, And Save Logged Information

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 View, Select, and Save Logged Information The wireless modem router logs security-related events such as denied incoming service requests, hacker probes, and administrator logins. If you enable Keyword Blocking in the Block Sites screen, the Logs screen show you when someone on your network tries to access a site that contains a blocked keyword or domain name.

  • Page 40: Log Message Examples

    Following are examples of log messages. In all cases, the log entry shows the time stamp as day, year-month-date hour:minute:second. Activation and Administration Tue, 2006-05-21 18:48:39 - NETGEAR activated [This entry indicates a power-up or reboot with initial time entry.] Tue, 2006-05-21 18:55:00 - Administrator login successful-IP:10.0.0.2 Thu, 2006-05-21 18:56:58 - Administrator logout - IP:10.0.0.2...
  • Page 41 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 In the main menu, under Security, select E-mail. The E-mail screen displays. You can make the following selections: • Turn E-mail Notification On. Select this check box if you want to receive email logs and alerts from the wireless modem router.
  • Page 42 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 cannot e-mail the log file, the log buffer might fill up. In this case, the wireless modem router overwrites the log and discards its contents. Protect Your Network...

  • Page 43: Chapter 4 Manage Your Network

    Manage Your Network This chapter describes how to perform network management tasks with your wireless modem router. This chapter includes: • Back Up, Restore, and Erase Your Settings • Router Status and Usage Statistics • Attached Devices • Diagnostics and Rebooting •...

  • Page 44: Back Up, Restore, And Erase Your Settings

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Back Up, Restore, and Erase Your Settings The configuration settings of the wireless modem router are stored in a configuration file. This file can be backed up to your computer, restored, or reverted to factory default settings. The following procedures explains how to do these tasks.

  • Page 45: Router Status And Usage Statistics

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Router Status and Usage Statistics Select Maintenance > Router Status. Field Description Account Name The host name assigned to the router in the Basic Settings screen. Firmware Version The wireless modem router firmware version. Manage Your Network...
  • Page 46 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Field Description ADSL Port MAC Address The Ethernet MAC address being used by the Internet (ADSL) port. IP Address The IP address used by the Internet (ADSL) port. If no address is shown, the wireless modem router cannot connect to the Internet. Network Type The network type depends upon your ISP.

  • Page 47: Statistics

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Field Description HSDPA Modem Modem Identity Modem SW version Modem driver version IMSI IMEI Operator Network mode Wireless Port Name (SSID) The service set ID, also known as the wireless network name for WLAN1. Region The country where the unit is set up for use.
  • Page 48 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 The Show Statistics screen displays the following statistics: Field Description WAN, LAN, or WLAN The statistics for the WAN (Internet), LAN (local), and wireless LAN (WLAN) ports. For each port, the screen displays the following: Status The link status of the port.

  • Page 49: Connection Status

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Connection Status On the Router Status screen, click the Connection Status button to display wireless modem router connection status. This screen shows the following statistics: Field Description Connection Time The time elapsed since the last connection to the Internet through the ADSL port.

  • Page 50: Attached Devices

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Attached Devices The Attached Devices screen contains a table of all IP devices that the wireless modem router has discovered on the local network. Select Maintenance > Attached Devices to view the following screen. For each device, the table shows the IP address, device name if available, and the Ethernet MAC address.

  • Page 51: Remote Management

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Remote Management Remote management lets you enable a user or users on the Internet to configure, upgrade, and check the status of your wireless modem router. Note: Be sure to change the wireless modem router’s default password to a very secure password.
  • Page 52 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Web browser access usually uses the standard HTTP service port 80. For greater security, you can specify a custom port by entering that number in the field provided. Choose a number between 1024 and 65535, but do not use the number of any common service port.

  • Page 53: Chapter 5 Advanced Configuration

    Advanced Configuration This chapter describes how to configure the advanced features of your wireless modem router. For information about remote management, see Remote Management on page 51. The following features are discussed in this chapter: • WAN Settings • Default DMZ Server •...

  • Page 54: Wan Settings

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 WAN Settings  To configure WAN settings: Select Advanced > WAN Setup to display the following screen. Setting Description Enable PPPoE Relay When enabled, this feature will allow a PPPoE client on a local PC to connect to a remote PPPoE server with the gateway acting as a relay agent.

  • Page 55: Default Dmz Server

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Default DMZ Server The default demilitarized zone (DMZ) server feature is helpful when you use some online games and video conferencing applications that are incompatible with NAT. The wireless modem router is programmed to recognize some of these applications and to work correctly with them, but there are other applications that might not function well.

  • Page 56: Dynamic Dns

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Dynamic DNS If your network has a permanently assigned IP address, you can register a domain name and have that name linked with your IP address by public Domain Name Servers (DNS). However, if your Internet account uses a dynamically assigned IP address, you will not know in advance what your IP address will be, and the address can change frequently.

  • Page 57: Lan Settings

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 feature causes *.yourhost.dyndns.org to be aliased to the same IP address as yourhost.dyndns.org. Click Apply to save your configuration. Note: If your ISP assigns a private WAN IP address such as 10.0.x.x or 10.x.x.x, the Dynamic DNS service will not work because private addresses will not be routed on the Internet.

  • Page 58: Dhcp

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2  To configure LAN settings: Select Advanced > LAN IP Setup. Setting Description Device Name This is a friendly name of the router. You can see this name for the router in Network Explorer on Windows systems IP Address This is the LAN IP address of the wireless modem router.

  • Page 59: Reserved Ip Addresses

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 LAN IP address. Using the default addressing scheme, you should define a range between 10.0.0.3 and 10.0.0.255, although you might want to save part of the range for devices with fixed addresses. The router delivers the following settings to any LAN device that requests DHCP: •...

  • Page 60: Quality Of Service (Qos)

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Note: The reserved address will not be assigned until the next time the computer contacts the router’s DHCP server. Reboot the computer or access its IP configuration and force a DHCP release and renew. ...
  • Page 61 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Click Setup QoS rule to display the QoS Priority Rule list: To change a rule, select its radio button. Scroll down to the bottom of the screen: To edit a rule, click Edit. to add a custom rule, click Add Priority Rule. Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.

  • Page 62: Advanced Wireless Settings

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Advanced Wireless Settings The advanced WPS settings cannot be displayed if you have selected WEP as the security option.  To display and specify advanced WPS settings: Select Advanced > Wireless Settings to display the following screen: By default the WPS (Push 'N' Connect) check box is selected.

  • Page 63: Static Routes

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Static Routes Static routes provide additional routing information to your router. Under normal circumstances, the router has adequate routing information after it has been configured for Internet access, and you do not need to configure additional static routes. You must configure static routes only for unusual cases such as multiple routers or multiple IP subnets located on your network.
  • Page 64 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Click Add to open the Static Routes screen. Enter a route name for this static route in the Route Name field. This name is for identification purpose only. Select Private if you want to limit access to the LAN only. The static route will not be reported in RIP.

  • Page 65: Universal Plug And Play

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Universal Plug and Play Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, access the network and connect to other devices as needed. UPnP devices can automatically discover the services from other registered UPnP devices on the network. ...

  • Page 66: Tr069 Client Configuration

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 • Click Cancel to disregard any unsaved changes. • Click Refresh to update the portmap table and to show the active ports that are currently opened by UPnP devices. TR069 Client Configuration The TR-069 WAN management protocol allows auto-configuration, provisioning, collection, and diagnostics to be performed by an Auto-Configuration Server (ACS).

  • Page 67: Wireless Bridging And Repeating Networks

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Wireless Bridging and Repeating Networks With the DGN2200Mv2 wireless modem router, you can build large bridged wireless networks that form an IEEE 802.11n Wireless Distribution System (WDS). Using the modem router with other access points (APs) and wireless devices, you can connect clients by using their MAC addresses rather than by specifying IP addresses.

  • Page 68: Point-To-Point Bridge Configuration

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Point-to-Point Bridge Configuration In point-to-point bridge mode, the wireless modem router communicates as an access point with another bridge-mode wireless station. As a bridge, wireless client associations are disabled—only wired clients can be connected. You must enter the MAC address of the other bridge-mode wireless station in the field provided.

  • Page 69: Multi-Point Bridge

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Multi-Point Bridge Multi-point bridge mode allows a router to bridge to multiple peer access points simultaneously. Wireless client associations are disabled. Only wired clients can be connected. Multi-point bridge mode configuration includes the following steps: •...

  • Page 70: Repeater With Wireless Client Association

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 • The LAN network configuration of the wireless modem router and other access points are configured to operate in the same LAN network address range as the LAN devices. • Only one access point, the DGN2200Mv2 wireless modem router in Figure 6, Multi-Point Bridge Mode, is configured in point-to-multi-point bridge mode;...
  • Page 71 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 The following figure shows an example of a repeater mode configuration. Wireless PC associated with AP 1 Wireless PC associated with AP 2 DGN2200 AP 2 in repeater mode Internet Wireless PC associated 10.0.0.2 with AP 3 AP 1 (parent AP in repeater mode) AP 3 in repeater mode...

  • Page 72: Chapter 6 Vpn Lite

    VPN Lite VPN LIte is a secure, easy-to-use, and cost-effective virtual private network (VPN). With VPN Lite, you can configure the network that is right for you with the flexibility to adjust the configuration as your business needs change. A VPN Lite configuration consists of sites and individual connections.

  • Page 73: Configuring Vpn Lite Sites

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Configuring VPN Lite Sites The VPN Lite Setup Wizard lets you configure your VPN Lite network connections one-by-one.  To use the VPN Lite Wizard: Log in to your router as described in Log In on page 7.
  • Page 74 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Review the configuration details and click Finish to complete the VPN Lite setup: Figure 10. Review the configuration Note: After selecting Finish, you might need to connect to your router with the new LAN IP address entered when you configured VPN Lite. Please wait until the progress bar on the router menu page has completed before attempting to reconnect.

  • Page 75: Chapter 7 Troubleshooting

    Troubleshooting This chapter provides information about troubleshooting your N300 Wireless ADSL2+ Modem Router DGN2200Mv2. After each problem description, instructions are provided to help you diagnose and solve the problem. For the common problems listed, go to the section indicated. • Is the router on? Go to Basic Functioning...

  • Page 76: Basic Functioning

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Basic Functioning After you turn on power to the router, the following sequence of events should occur: When power is first applied, verify that the Power LED is on. After approximately 10 seconds, verify the following: •...
  • Page 77 • Make sure the power cord is securely connected to your router and that the power supply adapter is securely connected to a functioning power outlet. • Check that you are using the power adapter supplied by NETGEAR for this product. If the error persists, you have a hardware problem and should contact Technical Support.

  • Page 78: Cannot Log In To The Wireless Modem Router

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Cannot Log In to the Wireless Modem Router If you are unable to log in to the wireless modem router from a computer on your local network, check the following: • If you are using an Ethernet-connected computer, check the Ethernet connection between the computer and the router as described in the previous section.

  • Page 79: Internet Led Is Red

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 ADSL Link LED Is Green or Blinking Green If your ADSL link LED is green or blinking green, then you have a good ADSL connection. You can be confident that the service provider has connected your line correctly and that your wiring is correct.

  • Page 80: Obtaining An Internet Ip Address

     To check the Internet IP address from the browser interface: Launch your browser, and select an external site such as www.netgear.com. Access the main menu of the wireless modem router’s configuration at http://10.0.0.2. In the main menu, under Maintenance, select Router Status and check that an IP address is shown for the WAN port.

  • Page 81: Troubleshooting Internet Browsing

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Note: Unless you connect manually, the wireless modem router will not authenticate using PPPoE or PPPoA until data is transmitted to the network. Troubleshooting Internet Browsing If your wireless modem router can obtain an IP address, but your computer is unable to load any Web pages from the Internet: •...

  • Page 82: Testing The Path From Your Computer To A Remote Device

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 If the path is not working, you see this message: Request timed out If the path is not functioning correctly, you could have one of the following problems: • Wrong physical connections Make sure that the LAN port LED is on. If the LED is off, follow the instructions in Troubleshooting with the LEDs on page 76.

  • Page 83: Restoring The Default Configuration And Password

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Restoring the Default Configuration and Password This section explains how to restore the factory default configuration settings, changing the router’s administration password to admin and the IP address to 10.0.0.2. You can erase the current configuration and restore factory defaults in two ways: •...
  • Page 84 Technical Specifications This appendix includes technical specifications for the N300 Wireless ADSL2+ Modem Router DGN2200Mv2. • Technical Specifications • Telkom Factory Default Configuration...

  • Page 85: Technical Specifications

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Technical Specifications Specification Description Network protocol and TCP/IP, RIP-1, RIP-2, DHCP, PPPoE or PPPoA, RFC 1483 Bridged or standards compatibility Routed Ethernet, and RFC 1577 Classical IP over ATM Power adapter North America: 120V, 60 Hz, input UK, Australia: 240V, 50 Hz, input Europe: 230V, 50 Hz, input All regions (output): 12V @ 1.5A output...

  • Page 86: Telkom Factory Default Configuration

    N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Telkom Factory Default Configuration You can use the Restore Factory Settings button on the bottom panel of your router to restore factory default settings. Press this button for 6 seconds. Your router will return to the factory configuration settings shown in the following table.
  • Page 87 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Feature Default Behavior Wireless Wireless communication Enabled SSID name Printed on bottom label. Generated by LAN MAC address. Security WPA-PSK + WPA2-PSK Broadcast SSID Enabled Country/region Europe RF channel Selected based on LAN MAC address Operating mode Up to 145 Mbps Data rate...

  • Page 88: Regulatory Compliance Information

    EDOC in Languages of the European Community Language Statement Cesky [Czech] NETGEAR Inc. tímto prohlašuje, že tento Radiolan je ve shode se základními požadavky a dalšími príslušnými ustanoveními smernice 1999/5/ES. Dansk [Danish] Undertegnede NETGEAR Inc. erklærer herved, at følgende udstyr Radiolan overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
  • Page 89 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Español [Spanish] Por medio de la presente NETGEAR Inc. declara que el Radiolan cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ NETGEAR Inc. ΔΗΛΩΝΕΙ ΟΤΙ Radiolan ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ...

  • Page 90: Fcc Declaration Of Conformity

    This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Declaration of Conformity We, NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the N300 Wireless ADSL2+ Modem Router DGN2200Mv2 complies with Part 15 Subpart B of FCC CFR47 Rules.

  • Page 91: Canadian Department Of Communications Radio Interference Regulations

    Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. GPL License Agreement GPL may be included in this product; to view the GPL license agreement go to ftp://downloads.netgear.com/files/GPLnotice.pdf. For GNU General Public License (GPL) related information, please visit http://support.netgear.com/app/answers/detail/a_id/2649 . Notification of Compliance...
  • Page 92 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 Interference Reduction Table The table below shows the Recommended Minimum Distance between NETGEAR equipment and household appliances to reduce interference (in feet and meters). Household Appliance Recommended Minimum Distance (in feet and meters) Microwave ovens...
  • Page 93 Index Numerics primary secondary 3G Mobile Broadband Settings secondary DNS server Dynamic DNS access restricting email notification of security events router password Ethernet LED, troubleshooting and access lists address reservation admin user name ADSL settings factory settings, restoring Advanced Wireless Settings screen filtering antenna, position firewall services, scheduling...
  • Page 94 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 LAN settings restoring configuration file factory settings location, router router location logging in router statistics logging out router status login time-out logs scheduling firewall services secondary DNS server MAC address filtering sending logs by email rejected services, blocking restricting access by...
  • Page 95 N300 Wireless ADSL2+ Modem Router DGN2200Mv2 VPN LIte VPN Lite Wizard WAN settings MTU size ping SIP ALG SPI Firewall Wi-Fi Protected Setup (WPS) WINS wireless bridging and repeating wireless distribution system (WDS) Wireless LED, troubleshooting wireless mode wireless network, range and interference wireless security Wireless settings wireless settings...

Table of Contents