NETGEAR DGFV338 ProSafe Reference Manual page 125

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
7. Enter the WAN IP address of the remote FVX538 and then enter the WAN IP address of the
local DGFV338. (Both local and remote ends must define the address as either an IP address
or a FQDN. A combination of IP address and FQDN is not permissible.).
Figure 5-4
8. Enter the LAN IP address and subnet mask of the remote FVX538.
9. Click Apply to create the "to_fvx" IKE and VPN policies. The VPN Policies screen will
display showing the "to_fvx" policy as enabled in the List of VPN Policies table.
Virtual Private Networking
v1.0, May 2008
5-11