NETGEAR DGFV338 ProSafe Reference Manual page 151

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
1. Right-click the VPN client icon in the Windows toolbar. In the upper left of the Policy Editor
window, click the New Policy editor icon.
a. Give the connection a descriptive name such as "modecfg_test" (this name will only be
used internally).
b. From the ID Type pull-down menu, select IP Subnet.
c. Enter the IP Subnet and Mask of the ProSafe DGFV338 (this is the LAN network IP
address of the gateway).
d. Check the Connect using radio button and select Secure Gateway Tunnel from the pull-
down menu.
e. From the ID Type pull-down menu, select Domain name and enter the FQDN of the
ProSafe DGFV338; in this example it is "local_id.com".
f. Select Gateway IP Address from the second pull-down menu and enter the WAN IP
address of the ProSafe DGFV338; in this example it is "172.21.4.1".
Figure 5-25
2. From the left side of the menu, click My Identity and enter the following information:
a. Click Pre-Shared Key and enter the key you configured in the DGFV338 IKE menu.
b. From the Select Certificate pull-down menu, select None.
c. From the ID Type pull-down menu, select Domain Name and create an identifier based on
the name of the IKE policy you created; for example "remote_id.com".
Virtual Private Networking
v1.0, May 2008
5-37