NETGEAR DGFV338 ProSafe Reference Manual page 104

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
• After a PC has finished using a port triggering application, there is a time-out period before the
application can be used by another PC. This is required because the DGFV338 cannot be sure
when the application has terminated.
Note: For additional methods of allowing inbound traffic, see
Forwarding)" on page
To add a new port triggering rule:
1. Select Security from the main menu and Port Triggering from the submenu. The Port
Triggering screen will display.
Figure 4-19
2. Enter a user-defined name for this rule in the Name field.
3. From the Enable pull-down menu, indicate if the rule is enabled or disabled.
4. From the Protocol pull-down menu, choose either TCP or UDP transport protocol.
5. In the Outgoing (Trigger) Port Range fields:
a. Enter the Start Port range (1 - 65534).
b. Enter the End Port range (1 - 65534).
6. In the Incoming (Response) Port Range fields:
a. Enter the Start Port range (1 - 65534).
b. Enter the End Port range (1 - 65534).
4-28
4-7.
v1.0, May 2008
"Inbound Rules (Port
Security and Firewall Protection