NETGEAR DGFV338 ProSafe Reference Manual page 200

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
Figure 7-7
4. Select Active to make this route effective.
5. Select Private if you want to limit access to the LAN only. The private static route will not be
advertised in RIP.
6. Enter the Destination IP Address to the host or network to which the route leads.
7. Enter the IP Subnet Mask for this destination. If the destination is a single host, enter
255.255.255.255.
8. Enter the Interface which is the physical network interface (ADSL, WAN Ethernet, or LAN)
through which the destination host or network is accessible.
9. Enter the Gateway IP Address through which the destination host or network can be reached
(must be a router on the same LAN segment as the DGFV338).
10. Enter the Metric priority for this route. If multiple routes to the same destination exit, the
route with the lowest metric is chosen (value must be between 1 and 15).
11. Click Apply to save your settings. The new static route will be added to Static Routes table.
You can edit the settings of a static route in the Static Routes table by clicking Edit in the Action
column adjacent to the route.
7-12
v1.0, May 2008
LAN Configuration