DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
Routing Information Protocol (RIP)
RIP (Routing Information Protocol, RFC 2453) is an Interior Gateway Protocol (IGP) that is
commonly used in internal networks (LANs). It allows a router to exchange its routing information
automatically with other routers, and allows it to dynamically adjust its routing tables and adapt to
changes in the network. RIP is disabled by default.
To configure RIP parameters:
1. Select Network Configuration from the main menu and Routing from the submenu. Click
RIP Configuration at the top of the Routing menu. The RIP Configuration screen will
display.
Figure 7-8
2. From the RIP Direction pull-down menu, select the direction in which the DGFV338 will
send or receive RIP packets. The choices are:
LAN Configuration
v1.0, May 2008
7-13