Logging In - NETGEAR DGFV338 ProSafe Reference Manual

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
• One-Line Microfilter. A simple microfilter provides an interface filter between your
telephone and the phone jack as shown in
machine, answering machine, or caller ID display requires an ADSL microfilter..
Figure 2-1
You can also connect the one-line filter to a phone-jack splitter to allow for connection of the
wireless firewall. However, the phone-jack splitter must be a designated ADSL microfilter/
phone jack splitter.
• ADSL Microfilter with Built-In Splitter. Use an ADSL microfilter with built-in splitter
when there is a single wall outlet which must provide connectivity for both the wireless
firewall and the telephone equipment.
Figure 2-2
.
Warning: Do not connect the wireless firewall to the ADSL line through a

Logging In

Note: To connect to the DGFV338, your computer needs to be configured to obtain an IP
address automatically via DHCP.
To log in to the wireless firewall:
Basic Installation and Configuration
microfilter unless the microfilter is a combination ADSL microfilter/
splitter specifically designed for this purpose. Doing so will block your
connection to the Internet. If you are unsure whether your microfilter is
the correct type, connect the wireless firewall directly to your phone line.
v1.0, May 2008
Figure 2-1. Each device such as a telephone, fax
2-3