Configuring The Adsl Port - NETGEAR DGFV338 ProSafe Reference Manual

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
1. Connect to the wireless firewall by typing http://192.168.1.1 in the address field of your
browser (such as Internet Explorer or Mozilla Firefox). The login screen will display.
Figure 2-3
2. In lower case letters, enter admin for the DGFV338 User Name and password for the
DGFV338 Password. Both fields are case-sensitive. (The DGFV338 user name and password
are not the same as any user name or password you may use to log in to your Internet
connection.)
3. Click Login. The ProSafe Wireless ADSL Modem VPN Firewall Router user interface will
display.
Note: You might want to enable remote management at this time so that you can log
in remotely in the future to manage the wireless firewall. See
Remote Management Access" on page 6-9
management enable is cleared with a factory default reset.
Note: When you enable remote management, we strongly advise that you change
your password. See
page 6-8

Configuring the ADSL Port

Before your ADSL WAN port can establish a connection to the ADSL service, you must configure
the correct ADSL modem settings for your local ADSL service. These settings are obtained from
your ADSL provider, and must be manually configured. They are not auto-detected by the
DGFV338.
2-4
"Changing the Passwords and Login Time-out" on
for the procedure on how to do this.
v1.0, May 2008
"Enabling
for more information. Remote
Basic Installation and Configuration