Default Settings and Technical
A.
Specifications
This appendix provides the default settings and the physical and technical specifications of the
wireless VPN firewall in the following sections:
•
Default Settings
•
Physical and Technical Specifications
Default Settings
You can use the factory default Reset button located on the rear panel to reset all settings to
their factory defaults. This is called a hard reset (for more information, see
Default Settings
•
To perform a hard reset, press and hold the factory default Reset button for
approximately 8 seconds (until the Test LED blinks rapidly). The wireless VPN firewall
returns to the factory configuration settings that are shown in the following table.
•
Pressing the factory default Reset button for a shorter period of time simply causes the
wireless VPN firewall to reboot.
The following table shows the default configuration settings for the wireless VPN firewall:
Table 81. Wireless VPN firewall factory default configuration settings
Feature
Router login
User login URL
Administrator user name (case-sensitive)
Administrator login password (case-sensitive)
Guest user name (case-sensitive)
Guest login password (case-sensitive)
on page 286):
Default behavior
https://192.168.1.1
admin
password
guest
password
331
A
Revert to Factory