Automatically Detecting The Adsl Isp Connection - NETGEAR DGFV338 ProSafe Reference Manual

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
You can configure the Internet connections manually or by using the Auto Detect feature of the
DGFV338.

Automatically Detecting the ADSL ISP Connection

Note: The Auto Detect feature detects the ISP settings on an ADSL WAN port that
has a working ADSL modem line connection. It does not detect the ADSL
modem settings. Before using Auto Detect, configure the ADSL modem, as
described in
To automatically configure your ADSL ISP settings and connect to the Internet:
1. Go to the ADSL ISP Settings screen shown in
option Network Configuration and the sub-menu option WAN Settings.
2. Click Auto Detect at the bottom of the screen to automatically detect the type of Internet
connection provided by your ISP. Auto Detect will probe for different connection methods and
suggest one that your ISP will most likely support.
When Auto Detect successfully detects an active Internet service, it reports which connection type
was discovered. The options are described in
Figure 2-5
2-6
"Configuring the ADSL Port" on page
Figure 2-5
Table 2-1.
v1.0, May 2008
2-4.
by selecting the primary menu
Basic Installation and Configuration