Enabling Remote Management Access - NETGEAR DGFV338 ProSafe Reference Manual

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
The password and time-out values you entered will revert back to password and 5 minutes,
respectively, after a factory default reset.

Enabling Remote Management Access

Using the Remote Management page, you can allow an administrator on the Internet to configure,
upgrade, and check the status of your ProSafe DGFV338. You must be logged in locally to enable
remote management (see
Note: Be sure to change the firewall default configuration password to a very secure
password. The ideal password should contain no dictionary words from any
language, and should be a mixture of letters (both upper and lower case), numbers,
and symbols. Your password can be up to 30 characters. See
Passwords and Login Time-out" on page 6-8
To configure your firewall for Remote Management:
1. Select Administration from the main menu and Remote Management from the submenu.
The Remote Management screen will display. ..
Figure 6-2
2. Click Yes to Allow Secure HTTP Management.
Router and Network Management
"Logging In" on page
v1.0, May 2008
2-3).
for the procedure on how to do this.
"Changing the
6-9