Automatically Detecting The Ethernet Isp Connection - NETGEAR DGFV338 ProSafe Reference Manual

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual

Automatically Detecting the Ethernet ISP Connection

To automatically configure your Ethernet ISP settings and connect to the Internet:
1. Go to the Ethernet ISP Settings screen by selecting the primary menu option Network
Configuration, then the sub-menu option WAN Settings. Click the Ethernet ISP Settings
tab to display the screen shown in
2. Click Auto Detect at the bottom of the screen to automatically detect the type of Internet
connection provided by your ISP. Auto Detect will probe for different connection methods and
suggest one that your ISP will most likely support.
When Auto Detect successfully detects an active Internet service, it reports which connection type
it discovered. The options are described in
Figure 2-6
Table 2-1. Internet Service Connection Methods
Connection Method
PPPoE
PPPoA
Basic Installation and Configuration
Figure
Table
Data Required for Configuration
ISP Login (Username, Password).
ISP Login (Username, Password).
v1.0, May 2008
2-6.
2-1.
2-7