NETGEAR DGFV338 ProSafe Reference Manual page 187

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
• Use Custom NTP Servers: To use a particular NTP server, enter the name or IP address
of the NTP Server in the Server 1 Name/IP Address field. You can enter the address of a
backup NTP server in the Server 2 Name/IP Address field. If you select this option and
leave either the Server 1 or Server 2 fields empty, they will be set to the default Netgear
NTP servers.
Note: If you select the default NTP servers or if you enter a custom server FQDN, the
DGFV338 must determine the IP address of the NTP server by a DNS lookup.
You must configure a DNS server address in the ISP Settings menu before the
DGFV338 can perform this lookup.
5. Click Apply to save your settings.
Router and Network Management
v1.0, May 2008
6-29