Setting A Schedule For Firewall Rules - NETGEAR DGFV338 ProSafe Reference Manual

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
3. Modify the default Advertisement Period and Advertisement Time to Live settings, if
desired. The defaults are 30 minutes and 4 hops, respectively.
4. Click Apply to save the new settings. Devices attached to the router can now use the router
resources.
5. Click Refresh to update the Portmap table to show active ports currently opened by UPnP
devices.

Setting a Schedule for Firewall Rules

If you defined an outbound or inbound rule to use a schedule, you can set up a schedule for when
blocking occurs or when access is restricted. The firewall allows you to specify when blocking
will be enforced by configuring one of the Schedules—Schedule 1, Schedule 2 or Schedule 3.
The ProSafe DGFV338 uses the Network Time Protocol (NTP) to obtain the current time and date
from one of several Network Time Servers on the Internet.
To invoke rules and block keywords or Internet domains based on a schedule:
1. Select Security from the main menu, and Schedule from the submenu. The Schedule 1 screen
will display.
Figure 4-21
2. Schedule days by selecting either the All Days radio button or the Specific Days radio button.
If you selected Specific Days, specify which days.
Security and Firewall Protection
v1.0, May 2008
4-31