Troubleshooting - Honeywell FMC2000 User Manual

23 Troubleshooting

Problem
Battery backup
cannot power the
FMC2000 after the
main AC power is
disconnected
Lost password
Buzzer
Inoperative
FMC2000 cannot
receive and display
monitor(s)
FMC2000 User's Guide
Possible Reasons & Solutions
Reasons:
Solutions:
Solutions:
Reasons:
Solutions:
Reasons:
Solutions:
81
Battery hardware switch
is turned off.
Discharged battery.
Defective battery.
Turn off the FMC2000,
and turn it on again using
its power switch.
Make sure main power is
connected and turned on.
Charge or replace
battery.
Call Technical Support
at +1 408-752-0723 or
toll-free at
+1 888-723-4800
Bad buzzer.
Check that buzzer is not
turned off.
Call authorized service
center.
PAN IDs do not match.
FMC2000 is too far
from the monitor(s).
Check PAN IDs.
Controller should be
closer to the monitor(s).
Press [Y/+] on the
MeshGuard.