Modem Id; Location; Data Interval - Honeywell FMC2000 User Manual

15.1 Modem ID

(S) Select the ID of one of the remote monitor's modems so that
you can change its detector settings in the FMC2000.
1. Press Enter.
2. Press the up or down arrow to move through the list of IDs.
3. Press Enter to select a Modem ID, or press Back to return to
the Wireless Detector Settings menu without saving your
changes, or press Exit to return to the monitoring screen
without saving your changes.

15.2 Location

(W) Set a location name for a monitor in the network.
1. Press Enter.
2. Input a name for the location. A small icon appears that says
"ABC." This prompts you to type in a name for the location
using the keypad's alphabet keys. Each key has multiple
letters, so you may have to press each key a number of times
to get the letter you want (for example, press once to get "A,"
twice to get "B," and three times to get "C").
3. After naming the location, press Enter to make and save a
selection. Press Back to return to the Wireless Detector
Settings menu without saving your changes, or press Exit to
return to the monitoring screen without saving your changes.

15.3 Data Interval

(W) Set an interval for the datalog. This can be set between 60 and
600 seconds.
1. Press Enter.
2. Press number keys to enter a new interval.
FMC2000 User's Guide
50