Table of Contents
Advertisement
9 Display Information
If remote monitors are connected and sending data to the
Controller, each monitor's data is shown in a row with an
identification number, radio ID, Station name, sensor value
(reading), sensor type, and status (OK checked).
Wireless
Status
Network
Status
Note: When wireless connectivity to an instrument is lost, the
checkbox under the "OK" heading is replaced by this symbol:
The instrument is not removed from the list. Instead, it drops to
the bottom of the list. If connectivity is restored, the checkbox is
shown again.
FMC2000 User's Guide
Datalogging
Status
25
Power Type
Date
Time
Advertisement
Table of Contents
