Preparing The Fmc2000 For Data Storage - Honeywell FMC2000 User Manual

FMC2000 User's Guide
7.5

Preparing The FMC2000 For Data Storage

Before operating the FMC2000, make sure it has an SD card in the
memory slot. This is necessary for storing datalog information.
1. Unlock the FMC2000.
2. Open the door.
The SD card slot is on the main PC board as shown:
IMPORTANT!
Before inserting or removing an SD card, the FMC2000 must be
turned off, datalogging turned off, or the FMC2000 placed in
Standby Mode. For details on turning datalogging off, see page
58. For details on turning the FMC2000 off or on, see page 22.
19