Silence Alarm - Honeywell FMC2000 User Manual

FMC2000 User's Guide

11.3 Silence Alarm

If the system is in alarm, you can silence the local alarm buzzer.
Press the down-arrow/alarm-silence button. The local alarm
buzzer is silenced, but the red alarm light continues to flash and
the relay continues to act in the state of alarm. If the relay setting
is set to latch, a pop-up screen asks if you want to disable the
relay. Refer to the relay setting section on page 53 of this guide for
more details on setting the relay latch state.
Note: If you silence the audio alarm and another alarm message is
sent by a MeshGuard in the network, the local alarm buzzer will
sound (it is no longer disabled) and the red light flashes.
Also note that that the alarm buzzer and alarm light can be
permanently disabled in the configuration menus. Refer to pages
47 and 48 for details.
30