Honeywell FMC2000 User Manual page 17

FMC2000 User's Guide
WARNING!
Whenever you replace the SD card, the FMC2000 must be either
turned off or in standby mode (see page 19). Otherwise, data may
be lost or the SD card may be corrupted. See "Preparing The
FMC2000 For Data Storage" on page 19 for details on safely
inserting and removing an SD card.
IMPORTANT!
The SD card that comes with the FMC2000 is pre-formatted and
ready for use. If you purchase an SD card from another vendor, its
capacity must be 2GB or less. In addition, it may need to be
formatted before it can be used in the FMC2000. Honeywell
Analytics cannot guarantee SD cards from other sources will work
with the FMC2000. Refer to Formatting An SD Card on page 94
for details.
Note: The SD card inside the FMC2000 should only be used for
FMC2000 data recording. Do not save other files to the SD card.
In addition, do not use one SD card for more than one FMC2000
or exchange it from one FMC2000 to another.
Transferring records from the SD card to a PC every 6 month is
recommended. This enhances data security and speeds the data-
transfer process.
15