Delete Monitors Configuration; Delete Relay Configuration; Echoview; Alarm Buzzer - Honeywell FMC2000 User Manual

5. Press number keys to set the number, followed by Enter.

14.4 Delete Monitors Configuration

This allows you to delete the configuration of the monitors. This is
important if you are using the FMC2000 with different sets of
MeshGuard monitors. By deleting existing configurations, the
FMC2000 has more memory space to devote to the new monitors.
1. Press Enter.
2. When you see the "Confirm?" dialog, press Enter to clear the
configuration. Otherwise, press Back or Exit.

14.5 Delete Relay Configuration

This allows you to delete the configuration of the relays.
1. Press Enter.
2. When you see the "Confirm?" dialog, press Enter to clear the
configuration. Otherwise, press Back or Exit.

14.6 EchoView

Enable this function to use a provided Honeywell Analytics Echo
View FMC400 in the system's network. Refer to the Echo View
manual for details. Note: The default value is "Disable."
1. Press Enter.
2. Select Enable or Disable by using the up and down arrows.
3. Press Enter to lock in your selection and exit the Pager
Function menu.

14.7 Alarm Buzzer

This sets whether the alarm buzzer sounds when the FMC2000 is
in alarm, or is silent.
1. Press the up or down arrow to select Enable or Disable.
2. Press Enter.
FMC2000 User's Guide
47