After Transferring Data From The Sd Card - Honeywell FMC2000 User Manual

FMC2000 User's Guide
21 After Transferring Data From The SD
Card
Once you have transferred the files from the SD card to your
computer, you can open them in a spreadsheet program (such as
Microsoft Excel) or in a word-processing program (such as
Microsoft Word). You should open them as soon as possible to
make sure that all of the data transferred properly and was not
corrupted.
Note: Do not use the SD card for other functions (such as storing
images from a digital camera) and do not modify the record and
save it again on the SD card. Also, if you are using multiple
FMC2000 controllers, an SD card should be dedicated to only one
FMC2000.
You can place the SD card back into the FMC2000 and resume
collecting data. New files will not overwrite old ones.
If the SD card is full, or you want to retain it as a physical archive
for future reference or backup, you can replace it with any SD
card. Typically, 1GB is a good minimum size. The FMC2000 can
accept SD cards with capacities up to 2GB (providing storage for
up to 3 years with 24 monitors). When keeping an SD card for
long-term storage, it is a good idea to lock the card (move the tab
on the left side of the card to the "locked" position). This ensures
that if it is put into a computer or FMC2000, data cannot be
written to it.
77