Del Binding; Channel; Ping Network - Honeywell FMC2000 User Manual

18.1.4 Del Binding

This deletes the radio binding list. Use this when you remove
monitors from the network in order to keep the FMC2000 from
looking for monitors removed from service, and to allow more
free space for adding new monitors.
1. Press Enter. A box appears with the message "Confirm?"
2. Press Enter to make and save a selection. Otherwise, press
Back to return to the Wireless Modem menu without saving
your changes, or press Exit to return to the monitoring screen
without saving your changes.

18.1.5 Channel

This tells you the current channel that the network is operating on.
• 900MHz models use channels 0 to 10
• 2.4GHz models use channels 11 to 26

18.1.6 Ping Network

Pinging sends a signal to the units on the network. When a unit
receives a ping signal, it alarms once. This tests the radio
connection between the FMC2000 and other units on its network.
There are two pinging options:
• Ping NTW
• Auto Ping: 10 Seconds
Ping NTW (network) sends a ping signal to all the units on the
network one time. Auto Ping automatically sends a ping signal
once every 10 seconds until pinging is turned off at the FMC2000.
FMC2000 User's Guide
64