Vote - Honeywell FMC2000 User Manual

16.6 Vote

This enables "voting" for each relay, based on how many monitors
are simultaneously in alarm, programming how the relay responds
to multiple monitors sending alarm signals.
For example, you can set to trigger an alarm only if two (or three,
etc.) monitors are in an alarm state. This is intended to reduce the
number of false alarms by ensuring that only when
multiple monitors in a physical location send an alarm to the
FMC2000, it goes into alarm.
1. Press Enter.
2. With the first line highlighted, press the up or down arrow to
select which one you want to edit.
3. Press Enter.
4. Press the down arrow to highlight "Vote"
5. Press Enter.
6. Input a number of instruments.
7. Press Enter to save the new value.
8. Press the up or down arrow to step to the next or previous
column.
FMC2000 User's Guide
56