14.2 Advanced Password
The advanced password must have 6 digits. It is used to change
controller configurations. Note: You must enter advanced settings
to change basic password.
To change the advanced password:
1. Press Enter.
2. Input the 6-digit password (the default is 123456).
3. Press Enter to make and save a selection. Press Back to return
to the Basic Settings menu without saving your changes, or
press Exit to return to the monitoring screen without saving
your changes.
14.3 Online Monitors
This setting tells the FMC2000 how many monitors the network
includes. It sets the minimum number of monitors that the FMC2000 is
in communication with. The FMC2000 always knows when monitors
go off-line or are moved out of range of the network, and when the
number of monitors in the network drops below the minimum set here, a
Fault alarm is sounded. The status of each monitor in the network is
indicated by one of these symbols:
Monitor is online.
Monitor is offline.
Note: The default setting is 0. This tells the FMC2000 to ignore
any missing monitors from the network.
To set the number:
1. Press Enter.
2. Input the 6-digit password (the default is 123456).
3. Press down arrow to select Online Monitors.
4. Press Enter.
FMC2000 User's Guide
46