Table of Contents
Advertisement
18.2.3 Server IP
Input the IP address of your system's server that the FMC2000 is
connecting to, if you know it. Check with your IT department for
guidance on setting IP addresses for you system within a network.
Number such as 172.18.12.81.
1. Press Enter
2. Press a digit (1 through 9). After each number is input, it
advances to next digit.
3. When the IP address has been input, press Enter.
18.2.4 Server Port
Set the appropriate port for your TCP/IP to match your system (for
example, 9723). Check with your IT department for guidance on
server port settings.
To set the Server Port:
1. Press Enter.
2. Input a Server Port number (make sure the numbers you
choose are not blocked by your network's firewall).
3. Press Enter.
18.2.5 Client IP
The Client IP address is the address of the FMC2000 controller.
An IP address is used by individuals and Internet applications to
reach a specific computer. IP addresses consist of four sets of
numbers separated by periods. For example, you might use a
number such as 172.18.12.81.
FMC2000 User's Guide
67
Advertisement
Table of Contents
