Keypad; Alarms - Honeywell FMC2000 User Manual

7.3

Keypad

The keypad is used to navigate the menus and parameters in the
FMC2000. Many of the keys perform dual functions, and the four
large keys arranged vertically along the right side correspond to
the "soft key" icons arranged along the bottom of the display.
7.4

Alarms

Three types of alarms can occur:
• Fault
• Low alarm
• High alarm
A fault alarm occurs when there is a low battery in a monitor
transmitting to the FMC2000, when a monitor goes "offline" or
out of range (and its signal is no longer received), or when there is
an internal problem with the FMC2000. Low and high alarms
occur when any of the network's monitors' thresholds are
exceeded.
Note: If a low alarm is triggered and then a high alarm, the low
alarm continues to occur until all alarms are cleared.
FMC2000 User's Guide
18