Honeywell FMC2000 User Manual page 25

FMC2000 User's Guide
A screen with the RAE Systems logo appears first. (If the logo
does not appear, there is likely a problem and you should contact
Honeywell Analytics Technical Service.
\
The FMC2000 performs self-tests on its LCD, LEDs, and buzzer.
It also initializes connection with a wireless network or Ethernet
interconnection (if it is configured for Ethernet networking). After
30 seconds, the display shows the monitoring screen, indicating
that it is monitoring the system. It is now fully operational. If any
tests fail, refer to the Troubleshooting section of this guide.
Once the startup procedure is complete, the instrument shows
readings from any MeshGuard sensors on the network:
Note: Always start the FMC2000 controller first, before starting
MeshGuard monitors.
23