Edit Password - Honeywell EchoView User Manual

While the EchoView is being reset to its original factory settings, the screen shows that the activity
is taking place:
When the reset is complete, this screen appears:
Then the unit returns to the Settings menu.
Note: Factory Reset changes all EchoView settings to factory-default values. These include:
• PAN ID
• Channel
All custom-configured settings are removed and cannot be retrieved!

7.1.6. Edit Password

You can change the password by selecting "Edit Password."
At this screen, input your new password over the old one (or the default):
• Increase the number from 0 through 9 by pressing [Y/+].
• Decrease the number from 9 through 0 by pressing [N/-].
• Step from digit to digit using [MODE].
EchoView User's Guide
IMPORTANT!
21