Table of Contents
Advertisement
After finished the above settings, click Apply to save the configuration. Or, click Reset to
cancel the settings just made.
2
.
2
.
1
8
S
N
M
P
2
.
2
.
1
8
S
N
M
P
Any Network Management System (NMS) running the Simple Network Management
Protocol (SNMP) can manage the Managed devices equipped with SNMP agent, provided
that the Management Information Base (MIB) is installed correctly on the managed devices.
The SNMP is a protocol that is used to govern the transfer of information between SNMP
manager and agent and traverses the Object Identity (OID) of the management Information
Base (MIB), described in the form of SMI syntax. SNMP agent is running on the switch to
response the request issued by SNMP manager.
Basically, it is passive except issuing the trap information. The switch supports a switch to
turn on or off the SNMP agent. If you set the field SNMP "Enable", SNMP agent will be
started up. All supported MIB OIDs, including RMON MIB, can be accessed via SNMP
manager. If the field SNMP is set "Disable", SNMP agent will be de-activated, the related
Community Name, Trap Host IP Address, Trap and all MIB counters will be ignored.
Function name:
System
Function description:
This function is used to enable SNMP settings.
Parameter Description:
SNMP State
VigorSwitch P2261 User's Guide
<1> Alert: Action must be taken immediately.
<2> Critical: Critical conditions.
<3> Error: Error conditions.
<4> Warning: Warning conditions.
<5> Notice: Normal but significant conditions.
<6> Information: Information messages.
<7> Debug: Debug-level messages.
-
S
y
s
t
e
m
-
S
y
s
t
e
m
The term SNMP here The term SNMP here is used for the
activation or de-activation of SNMP.
43
Hide quick links:
Advertisement
Table of Contents
